Available settings for a fax *2Set the machine to receive the fax automatically even if you do not pick up the handset.Manual/auto switchChange the number of seconds until the machine starts receiving the fax.RX start time in Manual/auto switchWhen mainly receiving a fax:FAX priority modeWhen a call incomes, the telephone will ring. *1 The machine detects whether the call is a fax orvoice call automatically.- If the call is a fax, the machine will receive the fax automatically.- If the call is a voice call, the machine will ring.NoteAvailable settings for an incoming call *2Set the machine not to ring the telephone.Incoming ringChange the number of times to ring the telephone.Ring count in Incoming ringAvailable settings for a voice call *2Change the number of seconds until the machine starts ringing.Ring start time in FAX priority modeChange the number of seconds that the machine rings.Telephone ring time in FAX priority modeSet the machine to receive the fax after the machine stops ringing.Default action in FAX priority modeWhen subscribing to a ring pattern detection service provided by yourtelephone company:DRPD or Network switchWhen a call incomes, the telephone will ring. *1 The machine detects a fax call by the fax ringpattern.- If the call is a fax, the machine will receive the fax automatically.- If the machine does not detect the fax ring pattern, the telephone will continue ringing.NoteAvailable settings for a fax *2Change the number of times to ring the telephone.Ring count in Incoming ring.Set the fax ring pattern to be used when a fax incomes.DRPD: FAX ring patternWhen not receiving voice calls:When receiving a fax only:FAX only modeWhen a fax incomes, the machine will receive the fax automatically.*1 The telephone may not ring when a call incomes even if it is connected to the machine,depending on the type or settings of the telephone.*2 The settings can be changed on the Reception settings screen. To display the Receptionsettings screen, press the Setup button to select Device settings, FAX settings, then Receptionsettings.For details, refer to the on-screen manual: Advanced Guide .Page 31 of 1127 pagesSetting the Receive Mode
