Click Output Settings... to open the Output Settings dialog box in which you can select Output by back/front (Fast) or Output by page.Output by back/front (Fast)This is preferred when speed is required, as the documents are output in the back-to-front order.To output the documents in the correct page order, select Output by page.Output by pageOutputs the scanned documents in the correct page order.ImportantThis setting is available only when Document Type is Document (ADF Duplex) or Auto Mode.Color ModeSelect how to scan the document.ColorThis mode renders the image in 256 levels (8 bit) of R(ed), G(reen), and B(lue).GrayscaleThis mode renders the image in 256 levels (8 bit) of black and white.Black and WhiteThis mode renders the image in black and white. The contrast in the image is divided at certainlevels (threshold level) into black and white and is rendered in two colors.Document SizeSelect the size of the document to be scanned.When scanning both sides of the documents automatically from the ADF (Auto Document Feeder),select A4 or Letter.When you select Custom, a screen in which you can specify the document size appears. Select aUnits, then enter the Width and Height and click OK.ImportantWhen you select Auto Detect, the image may not be scanned at the correct position and size. Inthat case, change the size to the actual document size (A4, Letter, etc.) and align a corner of thedocument with the corner at the arrow (alignment mark) of the Platen.Orientation...Set the orientation and stapling side of the documents to scan from the ADF (Auto Document Feeder).Page 616 of 1127 pagesScan Settings Dialog Box (One-click Mode Screen)
