Chapter 6 Fine-tuning the MultiPASS Suite 1166. If prompted when the removal process is complete, restart your PC.If your installation of the MultiPASS Suite becomes damaged at somepoint (for example, program files are accidentally deleted from thesystem), you can repair your installation without having to remove andreinstall the software. To do so, follow the instructions for removing theMultiPASS Suite. However, when prompted, click Repair instead ofRemove. Then, follow the on-screen instructions. You may need to haveyour MultiPASS Suite installation disk available during the repairprocess.If you are still unable to install using the method above, carry out theoperation in Chapter 7, “Installation or removal of the MultiPASS Suitecannot be completed”.Reinstalling the MultiPASS Suite6After you have uninstalled the MultiPASS Suite, you use the sameinstructions for reinstalling as described in Chapter 2, “Installing theMultiPASS Suite.”Changing the Port Connection6To change ports between USB ports, or a USB port with a hub:Simply disconnect the USB cable from the USB port on your computerand, when ready, reconnect to the other USB port or hub.When changing the port connection, it is not necessary to remove andreinstall the MultiPASS Suite software.