Chapter 4 Scanning 60Multi-Photo Scan / Multi Crop in ScanGear 0You can scan two or more photos (small documents) at one time usingMulti-Photo Scan (Simple Mode) or Multi Crop (Advanced Mode).Each photo will constitute as one image.Multi-Photo Scan (Scanning two or more photos at one time)When scanning two or more photos without having to specify in detailsuch things as the scanning area, use Multi-Photo Scan in Simple Mode.However, photos that have an overall whitish appearance or have awhitish border may not be cropped accurately. Also, documents otherthan photos (particularly documents printed on white paper, hand-written text, business cards etc.) may also not be cropped accurately.Automatically there is a correction of documents that are not straight.However this will not happen if the image is off by more than 10 degrees.The document is scanned in the Color Mode of Color and Resolution of300 dpi.1. If using the Toolbar to scan, click Settings on the Toolbar. On theToolbar Settings tab, click Show scanner driver before scanning, selectit and click OK.2. Place the photos on the platen glass.Please leave a gap of at least 0.4 inches (1 cm) between each photoand the edge of the platen glass. You should be able to place up to 10photos on the platen glass at any one time if desired.
