Canon MultiPASS F20 Software User's Manual

Also see for MultiPASS F20: Basic guide Setup Specification

Contents

Chapter 4 Scanning 726. If you want to clear the current selection, click outside the cropborder.7. To preview the cropped image, click Preview.Scaling the Image Output SizeYou can scale the size of your preview image, to maintain the image sizewhile enlarging or reducing the output size. For example, if you scaleyour image by 50%, the output size of the image is half the size of theactual image size.To set an image scale:On the Main tab, in the Scale box, enter a percentage.Adjusting the Tone of a Color or Grayscale Image inAdvanced Mode6If you selected Color or Grayscale as your color mode, you can produce awide range of visual effects or corrections in your preview image byadjusting the settings on the Tone tab. The tone settings can be adjustedusing the following methods.To automatically correct the tone:Click Auto on the ScanGear toolbar or the Tone tab.To adjust the contrast or brightness of an image:1. On the Tone tab, click Contrast/Brightness.