Chapter 7 Troubleshooting 134In ScanGear, click Multi-Photo Scan to automatically specify thescan area.If there are white margins around documents such asphotographs, or if you want to trim a document (i.e. you want toscan only one part of a document), specify the area of the scanmanually (P. 71).To display ScanGear when scanning: On the Windows desktop,on the Toolbar, click Settings. Click Show scanner driver beforescanning (P. 86).2. When you do not want to display ScanGearEven if you do not want to display ScanGear, you can make ascan at the paper size specified and the area outside the papersize will not be scanned. Do the following:On the Windows desktop, on the Toolbar, click Settings. In theToolbar Settings dialog box, in the tab for the button used to scan,specify the paper size (P. 82).White lines appear on the left side of the image. 61. Place the document approximately 0.1 inches (3 mm) from the edgeof the platen glass.Cannot scan multiple photographs correctly.61. Does the position of the photographs and the way they arepositioned fulfil the following requirements?• There should be a gap of at least 0.4 inches (1 cm) between theedge of the platen glass and photographs.• There should be a gap of at least 0.4 inches (1 cm) between theedges of the photographs.• There should be no more than ten photographs.
