5) Remove the two mounting screws, and disconnect the nine connectors r (J201,J202, J203, J204, J205, J207, J208, J209, J210); then, remove the holding try drierPCB t.Figure 5-8787. Removing the Holding Tray Y Motor1) Slide the holding tray to the front and out of the copier.2) Turn over the holding tray assembly.3) Remove the two mounting screws q, and remove the right rail w.Figure 5-879qqwer tCOPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 5 PICK-UP/FEEDING SYSTEM5-105
