E. Installing the Copy Tray1. Replacing the Delivery GearIf you are not installing a stapler sorter or a sorter to the machine (i.e., if you will beusing the copy tray), you must replace the delivery gear with the gear (black) for the copytray.If you are installing a stapler sorter or a sorter, on the other hand, be sure to checkthat the gear is positioned as shown in illustration 1 of the table, and skip the steps thatfollow.COPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 9 INSTALLATION9-16WorkOpen the front door, and slide outthe fixing/feeding assembly; then,remove the fixing knob, releasinglever, and fixing feeding cover.Remove the E-ring, and remove thedelivery gear (white) from themachine.Replace the gear with the deliverygear (attached to the copy tray), andinstall the E-ring.Be sure that the groove on thefemale side of the new gear andthe male side of the torque limiterare engaged.Step12RemarksTorque limiter E-ringWhite gear(for sorter)Torque limiter E-ringBlack gear(for tray)Caution:
