VI. INSTALLING THE REMOTE DIAGNOSTIC DEVICE IIThe Remote Diagnostic Device II is not available in certain sales areas.A. Installation to the CopierKeep the following in mind when installing the RDD to the copier:1. This accessory is to be installed by a qualified personal.2. Make sure the copier has been properly installed before starting the work.3. Keep the copier’s power cord disconnected during the work.4. Be sure to use the appropriate screws (length, diameter).5. Make sure the computer in the service station has been properly loaded with theRDD’s settings data.1) Remove the two screws w to detach the RDD’s top cover q.Fig. 9-601wq wCOPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 9 INSTALLATION9-56Note:Caution:
