3. Removing the Deck Main Motor (M101)1) Detach the deck from the copier; then, remove the six screws, and remove the rearcover.2) Disconnect the two connectors q, and remove the four screws w, and remove thedeck main motor e. (At this time, take care not to damage the gear at the end of themotor spindle.)Figure 8-402qweCOPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 8 PAPER DECK-A18-36
