F. Main Motor Assembly1. Removing the Main Motor1) Remove the rear cover.2) Remove the high-voltage PCB.3) Remove the spring q, and loosen the tension pulley; then, remove the four mountingscrews w, detach the belt from the end of the main motor, and remove the mainmotor e.Figure 7-439q w eCOPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-34
