8. Removing the Y Motor Home Position Sensor1) Slide the holding tray assembly to the front and out of the copier.2) Remove the right rail, and turn over the holding tray assembly.3) Remove the mounting screw q, and remove the Y motor home position sensorassembly w.Figure 5-8829. Removing the Holding Tray Inlet Assembly1) Remove the mounting screw q, and remove the inlet assembly front upper cover w.Figure 5-883qwqwCOPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 5 PICK-UP/FEEDING SYSTEM5-107
