3-24Select the size of the Originals, then press the[OK] key.MEMO: ● When not using the RDF, place horizontal originals(11"x17", LGL, LTRR, STMTR) on the platen glass.Place the first original as in the figure on the right.Press the [2 ON 1] key, then press the [OK] key.Afterwards, press the [DONE] key.3Press the [PAPER SELECT] key to manuallyselect the copy paper size. (See “Manual PaperSelection,” on p. 2-24.)NOTICE: ● You cannot set Auto Paper Selection; manuallyselect a paper size (see p. 2-24).MEMO: ● The copier automatically selects the copy ratiodepending on the selected paper size (Auto Zoom).4Proceed to copy the first original.(See “Making Copies,” on p. 2-4.)MEMO: ● You can enter up to 50 copies for any one copy job.After the first original has been copied, themessage shown as the right appears in thetouch panel display. Place the second original,then press the Start key again.MEMO: ● To cancel the settings, press the Resetkey.(The copier returns to the Standard mode.)
