2-5Basic CopyingPlace your original on the platen glass.MEMO: ● Place your original on the platen glass. The surfacethat you want to copy must be placed face down.Align the corner of the original with the V mark in theupper-left corner of the platen.2VABCGently lower the RDF.CAUTION:● Close the RDF gently to avoid catching yourhand, as this may result in personal injury.WARNING:● Do not press down hard on the platen cover orfeeder when using the platen glass to copy thickbooks. This may damage the platen glass and/orresult in personal injury.NOTICE: ● When placing originals on the platen glass,original size recognition is performed after theRDF has been lowered. Be sure to lower the RDFbefore copying.3Program the copy settings.MEMO: ● Press the Number keys ( 1 – 0 ) to enter thecopy quantity. (See “Entering the Copy Quantity,”on p. 2-20.)● Press the [DARK] and [LIGHT] keys to adjust thecopy exposure. (See “Adjusting the CopyExposure,” on p. 2-21.)● Press the [PAPER SELECT] key to select the copypaper size. (See “Selecting the Copy Paper Size”on p. 2-22.)● Press the [REDUCE] and [ENLARGE] keys toselect a preset copy ratio. (See “Using Preset CopyRatios” on p. 2-40.)4 ResetClearEnergy SaverStopGuideAdditional FunctionsInterruptStartDisplay Contrast
