2-7Basic CopyingUsing the RDFAcceptable Originals■ Original weight:Original tray: LTR, vertically placed: 15-lb bond to 110-lb index (52 g/m 2 to 200 g/m 2 )LGL, 11" x 17", LTRR and STMT: 15 to 32-lb bond (52 g/m 2 to 128 g/m2 )■ Original size: STMT to 11" x 17" (STMT-size cannot be placed horizontally.)■ Original tray capacity: LGL or 11" x 17": 50 sheets (20-lb bond or 80 g/m2 )STMT, LTR or LTRR: 100 sheets (20-lb bond or 80 g/m2 )NOTICE: ●Do not place the following types of originals in the RDF:• Originals with tears or large binding holes• Severely curled originals or originals with sharp folds• Clipped or stapled originals• Carbon-backed paper or other originals which might not feed smoothly• Transparencies and other highly transparent originals● Check the condition of originals which have been fed through the RDF many times. Whencopying the same original repeatedly using the RDF, do not allow the original to circulatemore than about 50 times in a single job. Originals which have been fed through the RDFmany times can become folded or wrinkled and might not feed smoothly.Adjust the slide guides to fit the size of theoriginals.1ABCNeatly stack originals face up in the original tray.2NOTICE: ● Flip open the auxiliary tray when feeding LTRR,LGL, or 11" x 17"-size originals.
