2-21Basic CopyingTo select Automatic Exposure Control, press the[A] key. The [A] key becomes highlighted andthe copier automatically adjusts the copyexposure to the most appropriate level for theoriginal.MEMO: ● Press the [A] key again to return to ManualExposure Control. Pressing either the [LIGHT] or[DARK] key will also return the copier to ManualExposure Control.● If the original is a transparency, you may not be ableto use Automatic Exposure Control. If so, adjust thecopy exposure using Manual Exposure Control.● Manual Exposure Control cannot be changed toAutomatic Exposure during copying.The following two methods are available for adjusting the copy exposure:■ Manual Exposure ControlYou can manually adjust the copy exposure to the desired level using the Exposure([LIGHT] [DARK]) keys.■ Automatic Exposure ControlThe copier automatically adjusts the copy exposure to the most appropriate level for theoriginal.Adjusting the Copy ExposureManual Exposure (Standard Copy Setting)Press the [LIGHT] [DARK] keys to adjust thecopy exposure.MEMO: ● Move the indicator above the [LIGHT] [A] [DARK]keys to the left to make the exposure lighter or tothe right to make the exposure darker.● If you press the [LIGHT] or [DARK] keys whileAutomatic Exposure Control is in effect (i.e., the [A]key is highlighted), the [A] key returns to normaland Manual Exposure Control goes into effect.Automatic Exposure