Canon Oce PlotWave 300 Administration Manual

Also see for Oce PlotWave 750: Instructions

Contents

Canon Oce PlotWave 300 Administration Manual Manual pdf 195 page image

TroubleshootingTroubleshooting after a successful authenticationThe authentication is successful but I cannot see the job I submitted to the system.Possible cause:The owner of the job (the user name sent within the job) does not match the user name of theuser authenticated on the system.This issue can occur in the context of authentication by smart card or by user name andpassword.Actions:The user name used for authentication on the system must match the exact user name of theowner of the job:1. Verify the user name used for authentication on the system.- In case of authentication by smart card, start and follow the validation procedure (seeValidate the smart card configuration on page 178) and check the complete User PrincipalName in the report.Example: 'user1@mydomain.com' in the report below:- In case of authentication by user name and password check the domain, and the user nameused to log in on the printer user panel.2. Check the exact user name of the owner of the job. Set or change it when needed.Refer to the user authentication according to the job submission workflow, seeThe userauthentication in the main job submission workflows on page 172.• For a job submitted with the PS3 driver or Océ Publisher Select, the user name and thedomain of the user logged in on the workstation are used to submit the job (including thedomain when detected). If needed, log in on the workstation with the relevant user nameon the relevant domain (example: 'user1' on domain 'domain.com')• For a job submitted with the WPD2 driver, the 'user account name' displayed in WPD2, inthe top right part of the window is used. Change it if needed (example:user1@domain.com).Note: If the user account name is not displayed, open the 'Options' - 'Advanced options'window and check the option 'Require user authentication' in 'Troubleshooting'.• For a job submitted with Publisher Express, or via FTP, or via LPR, that contains a job ticket,open the job ticket to check the 'Username' field.• For a job submitted with Publisher Express, that does not contain a job ticket, check thecontent of the 'Job owner' field in the Publisher Express (Océ Express WebTools)application. Set or change the 'Job owner' to the user Fully Qualified Name (example:user1@domain.com)• For a job submitted via LPR that does not contain a job ticket, check the user name used forlogging on the workstation, and uncheck the setting, 'Require the fully qualified name ofthe job owner' (in Océ Express WebTools - Security - 'Configuration' - 'User accessconfiguration').The authentication is successful, I can see the jobs I submitted to the system but not all of themare printed.TroubleshootingChapter 4 - Security on Océ PlotWave 345/365 and Océ PlotWave 450/550 195