Canon PIXMA iP3000 Series Quick Start Manual

Also see for iP3000 - PIXMA Photo Printer: Supplementary guide Quick start guide Simplified service manual Easy Setup instructions Simplified service manual

Contents

Advanced Printing25• Layout ....................Borderless• Trimming ................Off (No trimming)• Image optimize .......On (ExifPrint)• Date print................Off (No printing)Additional settingsThe settings explained below cannot be made on some cameras. If any settingcannot be made, the default setting explained above is used.Names of settings that are displayed on Canon PictBridge-compatible cameras areused in the description given below. Different names may be displayed on yourcamera depending on the brand or model.For details, refer to your camera’s instruction manual.About “Paper size” and “Paper type”To change the paper size or paper type, operate from the camera to select thePictBridge print setup mode and confirm or check the settings.By default, 44" x 6" is selected from PPaper size and PPhoto (Photo Paper Plus Glossy) isselected from PPaper type for this printer. To use Photo Paper Pro, select FFast Photo fromPaper type.If using a Canon PictBridge-compatible camera, you can select 55" x 7" from PPaper size.The following sizes and types of paper can be loaded in the printer by selecting optionsfrom PPaper size and PPaper type.When 44" x 6" is selected from PPaper size, “2-up”, “4-up”, “9-up”, and “16-up” optionsmay be available in LLayout.“Paper size” setting “Paper type” setting Paper loaded in printer10 x 15 cm/4" x 6"(Default)Photo (Default) Photo Paper Plus GlossyFast Photo Photo Paper ProPhoto Photo Paper Plus Semi-glossPhoto Glossy Photo Paper13 x 18 cm/5" x 7" Photo Photo Paper Plus GlossyA4/8.5" x 11" (Letter) Photo Photo Paper Plus GlossyFast Photo Photo Paper ProPhoto Photo Paper Plus Semi-glossPhoto Glossy Photo Paper