Canon TM-200 Online Manual

Also see for imagePROGRAF TM-200: Service guide Quick guide Setup guide

◦ Set printer nameSpecifies the printer name. You can use up to 15 characters for the name.Note• You cannot use the same printer name as that already used for other LAN connected devices.• You cannot use a hyphen for the initial or last character of the printer name.◦ TCP/IP settingsPerforms IPv4 or IPv6 setting.◦ WSD settingSetting items when you use WSD (one of the network protocols supported in Windows 10, Windows8.1, and Windows 7).■ Enable/disable WSDSelects whether WSD is enabled or disabled.Note• When this setting is enabled, the printer icon is displayed on the Network Explorer inWindows 10, Windows 8.1, and Windows 7.■ Optimize inbound WSDSelecting Enable allows you to receive the WSD printing data faster.■ Timeout settingSpecifies the timeout length.◦ Bonjour settingsSetting items for LAN using Bonjour.■ Enable/disable BonjourSelecting Enable allows you to use Bonjour to perform the network settings.■ Service nameSpecifies the Bonjour service name. You can use up to 48 characters for the name.Note• You cannot use the same service name as that already used for other LAN connecteddevices.◦ IEEE802.1X settingsPerforms various settings for IEEE802.1X.◦ SNTP settingsPerforms various settings for SNTP (Simple Network Time Protocol).◦ Spanning tree settingEnables/Disables spanning tree. Selecting Enable avoids circulating data on a network.◦ LPR protocol settingEnables/Disables the LPR setting.153