Canon TM-200 Online Manual

Also see for imagePROGRAF TM-200: Service guide Quick guide Setup guide

Generating Server Certificate (Self-signed Certificate)When you use SSL connection via IPv6 network, you need to generate an IPv6 server certificate using theprinter.Generate the server certificate from Remote UI.Follow the procedure below.1. Checking Printer's IP Address2. Generating Server Certificate3. Checking Generated Server CertificateImportant• If you generate an IPv6 server certificate, you cannot use SSL communication via IPv4. In addition, awarning message may appear if you are using Remote UI.To reset the IPv6 server certificate, tap in the following order from the operation panel.(Setup) > Device settings > LAN settings > Wi-Fi / Wireless Direct / Wired LAN >Settings > Advanced > Reset SSL certificates > YesChecking Printer's IP Address1. Make sure printer is turned on.2. On the HOME screen, tap the Network icon.Depending on the type of LAN enabled, the icon displayed on the button may differ.3. Tap the enabled LAN.Diagonal lines are displayed for disabled LAN icons.4. Flick the screen, check the value on IPv6 link-local address.Write down the value on IPv6 link-local address for your reference when you open Remote UI andgenerate a server certificate.235