Canon TM-200 Online Manual

Also see for imagePROGRAF TM-200: Service guide Quick guide Setup guide

Select whether B4 or 10 inch is applied when a roll of an intermediate size is detected.◦ Roll paper setting 2Select whether A3 or 300 mm is applied when a roll of an intermediate size is detected.◦ Roll paper setting 3Select whether 300 mm or 12 inch is applied when a roll of an intermediate size is detected.◦ Roll paper setting 4Select whether 500 mm or 20 inch is applied when a roll of an intermediate size is detected.◦ Roll paper setting 5Select whether B2 or 20 inch is applied when a roll of an intermediate size is detected.◦ Roll paper setting 6Select whether A1 or 600 mm is applied when a roll of an intermediate size is detected.◦ Roll paper setting 7Select whether 600 mm or 24 inch is applied when a sheet of an intermediate size is detected.• Auto feed at power onWhen Enable is selected, the printer judges the existence of paper exchange when starting up, and ifpaper has been exchanged, paper feeding operation is performed.It may take time to judge paper exchange.When Disable is selected, the printer does not judge whether or not to change the paper when startingup, and waits with the current paper feed setting.• Print advanced paper settingsTapping Yes prints out each setting specified in Advanced paper settings.• Reset paper settings for all paperTapping Yes initializes each setting specified in Advanced paper settings.Entering the administrator password is required if it is enabled.Important• When you set the paper settings back to the factory default, added or updated paper informationusing Media Configuration Tool is erased.159