Canon TM-200 Online Manual

Also see for imagePROGRAF TM-200: Service guide Quick guide Setup guide

Check3 Check the settings of your device (smartphone/tablet).Make sure Wi-Fi is enabled on your device.For details, refer to your device's instruction manual.Check4 Make sure printer is selected as connection for device (e.g. smartphone ortablet).Select the identifier for Wireless Direct (SSID) specified for the printer as the connection destination fordevices.Check the destination on your device.For details, refer to your device's instruction manual or visit the manufacturer's website.To check the identifier for wireless direct (SSID) specified for the printer, display it using the operation panel ofthe printer or print out the network setting information of the printer.• Display on the touch screen.LAN settings• Print the network settings.Printing Network SettingsCheck5 Have you entered the proper password specified for the Wireless Direct?To check the password specified for the printer, display it using the operation panel of the printer or print outthe network setting information of the printer.• Display on the touch screen.LAN settings• Print the network settings.Printing Network SettingsCheck6 Make sure the printer is not placed too far away from the device.If the distance between the printer and device is too far, wireless communication becomes poor. Place theprinter and device close to each other.Check7 Make sure 5 devices are already connected.Wireless Direct does not allow more than 5 devices to be connected.Cannot Connect to a Printer via Wired LANCheck1 Make sure the printer is turned on.Check2 Make sure the LAN cable is connected properly.694