162For dome case attachment, see the “InstallationGuide” included with the camera.ImportantIf the reset switch is pushed, network-related settings will alsobe restored to factory default settings including the camera's IPaddress, subnet mask, default gateway address, etc.Accordingly, you can no longer operate the camera from thePC you were using to connect to the camera before. Wheninitializing the camera, use the “VB Initial Setting Tool” installedin your PC to set an IP address appropriate for the environmentin which the camera is used (See “Performing Initial Settings forthe Camera” (p. 28)).Reset SwitchVB-H41VB-H610VEReset SwitchVB-H610DReset Switch4 For VB-H610VE/VB-H610D, attach the dome case.Reset SwitchVB-H710F
