77Setting Page5Tool(1) [View Logs]Display a history of camera operations andconnections to each viewer, etc.(2) [View Current Settings]Display a list of current settings.(3) [Reboot]The camera is rebooted.(4) [Restore Settings]Discard user-defined settings and restore all settingitems to factory default settings except cameraadministrator password, network setting, date, time,time zone, SSL certificate, encrypted communicationsand host access restrictions. Executing this operationwill reboot the camera automatically.Note• It is recommended that you write down all current settingvalues before restoring factory default settings in [RestoreSettings] (p. 163).• The camera can be restored to factory default settings usingthe reset switch as well. Note, however, that this will reset allcamera settings to factory default settings except for date andtime (p. 162).[Maintenance]Viewing Event Logs and Current Settings and Performing MaintenanceThe following items can be used here.• ToolDisplay or Initialize Camera SettingsCaution• You must not turn off the camera while it isperforming the [Restore Settings] operation.Turning off the camera at this stage may result inmaking it unable to boot correctly.• Never touch the camera head duringinitialization. Initialization failure or malfunctionmay result.
