Performing Operations and Settings as the Administrator7-117 Admin Viewer/VB Viewer Moving the Preview FrameYou can move the preview frame to the desired position.Move by draggingClick within the preview frame and drag it over the subjectthat you want to see magnified.The preview frame turns blue when you drag it.Move by clickingClick a position outside of the preview frame and thepreview frame will move to that position. Click the subjectthat you want to see magnified.Note• After changing the preview frame, the image display area willcontinue to display the cropped image corresponding to thepreview frame even after the Viewer PTZ panel is closed.However, you reconnect to Admin Viewer, the initial status willbe restored.• The image display for the Viewer PTZ panel is subject to thesettings configured in [Maximum Number of Clients] and[Maximum Connection Time (sec.)] under [Image Server] in theSetting page. Therefore, depending on the settings, the imagemay not display or will display for a certain amount of time only.In such cases, see “The image is not displayed in the ViewerPTZ panel./The image disappears from the Viewer PTZ panel.”under “Troubleshooting” in “Chapter 8, Appendix” and confirmthe settings.• To return to the original display from magnified view, drag thepreview frame to its original size (entire screen).• The cropped position in the image display area will bereflected in full screen mode as well.Opening/Closing Control ItemsClicking the title of a control item will open or close it.You can open the various control items even withoutobtaining the camera control privileges, but the items willbe grayed out.Setting the Smart Shade ControlThe smart shade control function differs from backlightcompensation in that only dark areas are brightened whilebright areas are kept intact.1 [Smart Shade Control]Set to [Off] or [On].⇔
