8-8Log Messages on the CameraLog messages are classified into the following 5 types.NoteIf no content is recorded in a log for approximately two hours, “-- MARK --” will be recorded in the message area. Application (camera) messagesW001 Starting and stopping of system [info]W030 Startup and shutdown of WebView Livescope Client [info]W031 Transmitted video data size [info]W040 Clearing to external memory [info]List of Log MessagesCategory Level Code Fault levelalert Error 5xx Hardware-level failure (System operations will stop)crit Error 4xx Software-level failure (Task operations will stop)err Error 3xx Operational error (Operations will continue)warning Warning 2xx Non-operational errornotice Warning 1xx Error external to the systeminfo Information 0xx Information on normal operationDescription %1 webview (W001)%1 Starting or stoppingMeaning wvhttp server (webview) has started or stopped.Description %1%2 host=, user=, prio=< Priority>(W030)%1 W: WebView session, V: Session-less video client, N: Session-less event client%2 +: Connect, -: DisconnectMeaning The camera server client was connected or disconnected.Description %1= host=, user=, video=: (W031)%1 W: WebView session, V: Session-less video clientMeaning When a client disconnected, the total data that was sent to the client displayed in number of frames.Description %1 the image storing - %2 (W040)%1 Starting or stopping%2 Reason for starting/stoppingMeaning Started or stopped clearing stream recording to external memory.
