5-16E-mail Notification1 [Notification]Select [Text Only] or [Text with Image] as the content ofnotification. If [Upload] is set to [Upload Disabled],[Text with Image] will not be available.2 [Mail Server Name]Enter the host name or IP address of the SMTP server(using up to 63 characters).3 [Mail Server Port]Enter the port number of the SMTP server (factorydefault setting is [25]).4 [Sender (From)]Set the e-mail address of the sender (using up to 63characters).5 [Recipient (To)]Set the e-mail address of the recipient (using up to 63characters).6 [Authentication]Select [None], [POP before SMTP] or [SMTP-AUTH] forthe e-mail authentication method.Set an appropriate method according to theauthentication method used by the SMTP server tosend to.[User Name], [Password], [POP Server]If [POP before SMTP] is selected as the e-mailauthentication mode, enter the user name andpassword as well as the host name or IP address ofthe POP server required for authentication.[User Name], [Password]If [SMTP-AUTH] is selected as the e-mailauthentication method, enter the user name andpassword required for authentication.7 [Subject]Enter the subject of the e-mail to be sent using up to 31ASCII characters.8 [Message Body]Enter the message (text) of the e-mail to be sent usingup to 255 ASCII characters. Parameters can bespecified with the “%” character (P. 8-4).9 [E-mail Notification Test]Clicking [Exec] initiates an e-mail notification testbased on the settings currently entered. It is notnecessary to click [Apply].For a password, first click [Exec], then [Apply] thepassword.
