Canon VB-M700F Operation Manual

Also see for VB-M600VE: User guide Administrator's manual Operation guide Viewer Operation Guide Operation guide

Contents

6-14Detect criteria for [Removed Object Detection]Set detection areas for objects whose removal you want todetect.For [Duration (Sec)], set the time that must elapse afterthe object has been taken away. Detected mode will betriggered to ON when an object is taken away from thedetection area for a period longer than the set [Duration(Sec)].Any moving objects detected are shown with contourlines. As long as [Duration (Sec)] has not elapsed,contour lines are white. When [Duration (Sec)] haselapsed, contour lines take on the same color as thedetection area, indicating that “detected” mode has beentriggered to ON.Detect criteria for [Camera Tampering Detection]For [Camera Tampering Detection], the entire imagedisplay area becomes the detection area. “Detected”mode will be triggered to ON when the image isobstructed over an area exceeding the ratio set in[Change Ratio (%)].When [Change Ratio (%)] is changed, an indicator framerepresenting the area that can be obstructed is displayedfor 1 second in the center of the image display area. Thisallows you to check the change ratio of the cameratampering detection area, which occupies the entireimage display area, while specifying the [Change Ratio(%)] setting.Any moving objects detected are shown with contourlines. If it is smaller than [Change Ratio (%)], contour linesare white. If the image is changed for an area larger than[Change Ratio (%)], contour lines take on the same coloras the detection area, indicating that “detected” modehas been triggered to ON.NoteRight-click on the Intelligent Function Setting Tool display screento display the menu. There, the following functions can be used.[Copy detection area]Copy the detection area of the detection setting selected.[Paste detection area]Paste the copied detection area to the detection settingselected.It cannot be copied to camera tampering detection.[Clear detection area]Clear the detection area of the detection setting selected.It cannot be cleared in camera tampering detection.[Copy detection criteria settings]Copy the detection criteria of the detection setting selected.[Paste detection criteria settings]Paste the copied detection criteria to the detection settingselected.[Copy event settings]Copy the event operations of the detection setting selected.[Paste event settings]Paste the copied event operations to the detection settingselected.ImportantSet detection areas for removed object detection so that theyprecisely match the contours of the object in question.Influence from the target object's shadow or adjacent objectsmay result in the target object being recognized as larger thanactual and will not trigger Removed Object Detection. In suchcases, reconfigure the detection area to outline the recognizedtarget object.Removed objectdetectedContour of removedobjectObstructed areaindicatorContour of cameratampering object