Canon VB-M700F Operation Manual

Also see for VB-M600VE: User guide Administrator's manual Operation guide Viewer Operation Guide Operation guide

Contents

ixThe following explains the items that must be observed when using the VB-M700/600.If they are not observed, injury, death and/or property damage may occur. Read the following information carefully andobserve the instructions without fail.Important WarningsSafety PrecautionsCautionTO REDUCE THE RISK OF ELECTRIC SHOCK, DONOT REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS INSIDE. REFERSERVICING TO QUALIFIED SERVICE PERSONNEL.The AC adapter can be connected to VB-M700/600 froma standard AC power outlet.Please check your instruction manual to make sure thatyour VB-M700/600 is compatible with this adapter.• The socket-outlet should be installed near theequipment and should be easily accessible.• Unplug the equipment from the wall outlet beforecleaning or maintaining.FDA regulationThis Network Camera has not been evaluated by theFood and Drug Administration (FDA) for use as amedical device. When incorporated into a system withmedical applications, FDA regulations may apply.Therefore, please consult your legal advisor todetermine whether FDA regulations apply.FCC NOTICENetwork Camera, Model Name: VB-M700/600This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interference received,including interference that may cause undesiredoperation.Note: This equipment has been tested and found tocomply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation.This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used inaccordance with the instructions, may cause harmfulinterference to radio communications.However, there is no guarantee that interference will notoccur in a particular installation. If this equipment doescause harmful interference to radio or televisionreception, which can be determined by turning theequipment off and on, the user is encouraged to try tocorrect the interference by one or more of the followingmeasures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment andreceiver.• Connect the equipment to an outlet on a circuitdifferent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TVtechnician for help.Use of shielded cable is required to comply with class Blimits in Subpart B of Part 15 of FCC Rules.Do not make any changes or modifications to theequipment unless otherwise specified in the manual. Ifsuch changes or modifications should be made, youcould be required to stop operation of the equipment.Canon U. S. A. Inc.One Canon Plaza, Lake Success, NY 11042, U. S. A.Tel No. (516) 328-5600Canadian Radio Interference RegulationsThis Class B digital apparatus complies with CanadianICES-003.