135Additional InformationIf you record in both SP and LP modes on the same tape, the playback picture may becomedistorted, and the time code may not be written correctly.If you play back on this camcorder, a tape that was recorded in LP mode with another digital deviceor vice versa, the picture and sound may become distorted.1 Available only when recording in standard definition (SD).[OUTPUT LEVEL]: Select the amplitude of the audio output signal.1 Available only when you press the SET button within the time set for the [CAMERA SETUP] [REVIEW] setting (orimmediately after recording if it is set to [OFF]). AUDIO SETUPMenu item Setting optionsAUD.M.SET CH , CH , MIX/FIXED, MIX/VAR. – – – 59MIX BALANCE – – – 90DV AUDIO 16bit, 12bit 1 – – 57MONITOR SEL. NORMAL, LINE OUT – – – 90WIND SCREEN ON , OFF – – 57MIC SENSIT. NORMAL, HIGH – – 57XLR 1 TRIM +12dB, +6dB, 0dB, -6dB, -12dB – – 59XLR 2 TRIMOUTPUT LEVEL 1Vrms, 2Vrms – 90XLR ALC LINK LINK, SEP – – 59AUD.LIMITER ON, OFF – – 59 CARD OPERATIONSMenu item Setting optionsERASE ALL PRINT ORD NO, YES – – – 132ERASE ALL IMAGES NO, YES – – – 129INITIALIZE CANCEL, INITIALIZE, COMPL.INIT. – – – 131After opening the menu from the index screen:PROTECT – – – – 130PRINT ORDER – – – – 132After pressing the SET button:IMAGE ERASE CANCEL, ERASE – – 1 129PROTECT OFF, ON – – 1 130PRINT ORDER 0 COPIES – – – 132SLIDESHOW CANCEL, START – – – 1271/2 3/41/2 3/4COPY
