86Connection to a High Definition Monitor or HDTVUsing the HD/SD SDI TerminalActivate the HD/SD SDI output and select the appropriate video output option (HD or SD).1. Set the dial to .2. Open the menu and select [SIGNAL SETUP]. Select [SDI OUTPUT] and set it to [ON] or[ON(OSD)].3. From the same [SIGNAL SETUP] submenu select [SDI SPEC.]. Select [AUTO] or[SD LOCKED] to match the video output you wish to use.4. Close the menu.When [SDI OUTPUT] is set to [ON(OSD)], will appear on the screen and on-screen displays willbe included in the video signal output from the SDI terminal.When [SDI OUTPUT] is set to [ON(OSD)]: The on-screen displays included in the video output signal are determined by the display levelselected with the EVF DISPLAY button ( 39). Markers (safety zone guide, level/grid markers,etc.) are never included in the video signal output. The [SIGNAL SETUP] [COMP.OUT] setting is not available.1AUDIOVIDEORLS (S1)-VIDEOINPUTStereo Cable*(supplied)BNC Cable (commercially available)Signal flowSignal flowOpen the terminal cover* If [SDI OUTPUT] is set to [OFF] (no embedded audio), the audio signal is separate from the SDI videooutput signalWhiteRedWhiteRedCOPY
