66 With the custom function [LANC AE SHIFT] ( 104), you can change the function of the AE SHIFTdial on the optional ZR-2000 Zoom Remote Controller and use it to change the aperture value.Push AEIn M Manual mode you can use the Push AE functionwhen you want the camcorder to re-establish optimalexposure settings by automatically adjusting theaperture and gain (if the GAIN dial is set to A).Press the PUSH AE button and hold it presseddown.• The camcorder will adjust the aperture value and gainto achieve optimal exposure ( mark above theexposure indicator).• After you release the button, the aperture value and gain (if the GAIN dial is set to A) set by the camcorderwill override the previous settings made in M Manual mode. The Push AE function is not available when no lens is attached to the camcorder, or if the apertureof the lens attached cannot be controlled from the camcorder. You can use the custom keys ( 79) or the [SYSTEM SETUP/ ] [E.LCK B.LCK] setting toprevent the accidental operation of the PUSH AE button.COPY
