87External ConnectionsUsing the COMPONENT OUT TerminalSelect the appropriate component video signal depending on the TV or monitor you connect.Open the menu and select [SIGNAL SETUP]. Select [COMP.OUT], select a setting optionand close the menu.Using the HDV/DV Terminal• When connecting the camcorder to a monitor or TV that supports DV input, you may need to carry out aprocedure on the monitor or TV to recognize the camera.• If necessary, turn on the DV conversion and select whether to convert a tape recorded in HD to SD with thefollowing procedure.Open the menu and select [SIGNAL SETUP]. Select [HD DOWN-CONV], select a settingoption and close the menu.2AUDIOVIDEORLS (S1)-VIDEOINPUTSignal flowStereo Cable*(supplied)Signal flowDTC-1000 Component Video Cable (supplied)Open the terminal coverRedBlueGreenWhiteRedWhiteRed* The audio signal is separate from the component video signalYPbPr3CV-250FDV Cable (optional) orcommercially available6 pin-6 pin DV cable 4-pin6-pinCOPY
