Service Call Message 6-13Troubleshooting6TroubleshootingUsing the Machine with Limited FunctionsIf the Service Call Message screen appears indicating a malfunction of the optionalfinisher, you can clear the screen by setting the machine to the Limited FunctionsMode. In this mode, you can continue operating the machine by disabling thefinisher functions.IMPORTANTIf the main power is turned OFF, all the jobs in the machine’s memory will be erased.NOTE• Setting the machine to the Limited Functions Mode from the Service Call Messagescreen enables the Limited Functions Mode in Common Settings. (See “Configuringthe Machine’s Basic Settings” in the e-Manual.)• The Service Call Message screen may re-appear if the Limited Functions Mode isdeactivated without isolating the cause of the malfunction.3 Restart the machine.Turn OFF the machine, wait at least 10 seconds, and then turn it ON.1 Press [Limited Fnctns Mode].NOTEIf you want to turn OFF the machine,press [Shutdown].2 Press [Yes].To quit, press [No].
