Paper Drawers 5-5Routine Maintenance5• If problems occur, such as poor print quality or paper jams, try turning the paper stackover and reloading it.• For more information on the print direction of preprinted paper (paper which has logosor patterns already printed on it), see “Appendix” in the e-Manual.IMPORTANTMake sure that the paper drawer is fully inserted. You will not be able to make prints ifthe paper drawer is not completely pushed into the machine.NOTEIf there are remaining prints to be completed, the machine automatically resumesprinting as soon as you load the correct paper.6 Specify the paper type as required.For help, see “Configuring the Machine’s Basic Settings” in the e-Manual.IMPORTANTMake sure that the paper type setting of the paper drawer matches the type of thepaper that is being loaded.Adjusting a Paper Drawer to Hold a Different Paper SizeIf you want to change the size of paper in the paper drawer, adjust the slide guidesfor the new paper size as described below.5 Gently push the paper drawerback into the machine until itclicks into place.CAUTIONWhen returning the paper drawer toits original position, be careful notto get your fingers caught, as thismay result in personal injury.1 Open the paper drawer andremove all the loaded paper.For instructions on how to open the paperdrawer, see steps 1 and 2 in “LoadingPaper,” on p. 5-3.
