Turning ON/OFF the Machine 2-11Before You Start Using the Machine2NOTEAfter restarting the machine, you might want to check if the IP address is correctly setto the machine. For help, see “Connecting the Machine to a TCP/IP Network” in thee-Manual.Using the Control Panel Power Switch (Sleep Mode)8 Press [OK] to finish the initialsetup.From the next time the machine’s mainpower is turned ON, the Setup Guide doesnot appear.If you want to return to the previous screen,press [Back].9 Press [Yes] to restart themachine.If the IP address settings have beenspecified, restart the machine to make thesettings effective. Press [No] if you want tomanually restart the machine later. (See“Restarting the Machine,” on p. 6-12.)To turn the control panel ON or OFF, pressthe control panel power switch. When thecontrol panel is turned OFF, the machine isin the Sleep mode.NOTE• The machine will not enter the Sleep modewhen it is in operation.• The machine can receive, forward, or printdocuments when it is in the Sleep mode.Control Panel Power Switch Machine StatusON ReadyOFF Sleep mode