Turning ON/OFF the Machine 2-3Before You Start Using the Machine2NOTE• If the machine is managed with department IDs or user IDs, the log-in screen appears.In this case, enter your department ID or user ID (and password). (See “BasicOperations” in the e-Manual.)• You can select the top screen of the desired function that appears when the machineis turned ON. (See “Configuring the Machine’s Basic Settings” in the e-Manual.)When the Machine Is Turned ON for the First TimeWhen the machine is turned ON for the first time, the initial setup screens (SetupGuide) appear on the touch panel display, navigating you to perform the followingbasic setup items:• Language and country/region• Mixing the toner• Date & Time Settings• Fax settings (unit telephone number, unit name, and telephone line type)• IP address settings• Remote UI Access PasswordFollow the procedure below to quickly set the machine configuration and use itsbasic functions immediately.3 Wait until the machine is ready toscan.The screen on the left is displayed until themachine is ready to scan.The screen on the left is displayed when themachine is ready to scan.