CHAPTER 5 IMAGE FORMATION SYSTEMCOPYRIGHT © 2002 CANON INC. 2000 CANON iR1600/iR2000 REV.1 JAN. 2002 5-191. When you pull out the devel-oping assembly, the lever [8]at the rear of the developingassembly will come into con-tact with the plate [9] of thefixing assembly. Be sure towork slowly and with care.When it comes into contact,try pushing the grips downslightly as you pull on them.2. When you slide in the devel-oping assembly, push it in sothat it will slide along therails. When the lever [8]comes into contact with theplate [9] of the fixing assem-bly, try to lift it slightly asyou push it in.3. When you are mounting thedeveloping assembly, checkto make sure that the shaft[10] of the developing sleeveis in contact with the elec-trode [11].4. When mounting the develop-ing assembly, be sure to fitthe positioning pin [12] (atits rear) into the bushing[13].F05-702-05F05-702-04F05-702-06[9][8][11][10][13][12]
