Cardinal 225 Installation And Technical Manual

Also see for 225: Installation and technical manual Installation, Set-Up and Operation Manual

Contents

Cardinal 225 Installation And Technical Manual Manual pdf 52 page image

CALIBRATION AND SETUP, CONT.DIWith thproceeO SETUP (PWC Status)e SETUP MENU #1 displayed, press NEXT (Navigation Keys V Down Arrow) tod to SETUP MENU #2.SETUP MENU #21. SERIAL2. DIO3. PRINT TABS4. SETUP SCALE 15. CALIBRATE 1Enter Selection: 0 ` NEXT ^ PREV2. DIO (TWith the Sto the DIOWith the DIO SETUP MENU displayed the current status of the 16 Preset Weightyed is acceptable, press EXITreturn to the SETUP MENU #2.then pressthe ENTER key to save the new setting.DIO SetupWhen the status of all Preset Weight Comparators has been completed, press EXIT(Navigation K row) to exit and return to the SETUP MENU #2.OGGLE PWC STATUS)ETUP MENU #2 displayed, press the 2 key and then the ENTER key to proceedSETUP MENU.Comparators (PWC) will be shown. If the status displa(Navigation Keys U UP Arrow) to exit andOtherwise, press the PWC number to toggle its status (turn ON or OFF) andCompletedeys U UP ArSETUP MENU #21. SERIAL2. DIO3. PRINT TABS4. SETUP SCALE 15. CALIBRATE 1Enter Selection: 0 ` NEXT ^ PREVWith the SETUP MENU #2 displayed,y Proceed to the next setup parameter.y Press PREV (Navigation Keys U UP Arrow) to return to SETUP MENU #1.y Press NEXT (Navigation Keys V Down Arrow) to proceed to the SETUP MENU #3.8200-M538-O1 y 225 Installation Page 48