Cardinal 225 Installation And Technical Manual

Also see for 225: Installation and technical manual Installation, Set-Up and Operation Manual

Contents

Cardinal 225 Installation And Technical Manual Manual pdf 77 page image

CALIBRATION AND SETUP, CONT.Using the numeric keys, enter the value for the new backlight turn-on level and then pressve the new setting and return to SETUP MENU #3. Allowable valuese selected must be less than the Lights= value to activate.BACK LITE=0 B BACK LITE=XXBa light always OFF Level that backlightturns ON atPASSWORD3. PASSWORDThe password setup parameter determines whether a password is required to enterernational use (USA=NO). If theILL NOTey and then the ENTER key. The displaytheillIf the se roceed to erwise,using the alpha-numeric keys, enter up to 12 characters for the password and then pressthe ENTERthe ENTER key to saare: 0 through 99.NOTE! The valuACK LITE=99cklight always ON Back(PASSWORD)Calibration and Setup on indicators programmed for intindicator is programmed for domestic use (USA=YES) the password parameter Wbe displayed on SETUP MENU #3.ith the SETUP MENU #3 displayed press the 3 kWwill change to show PASSWORD=XXXXXXXXXXXX. Note that XXXXXXXXXXXX iscurrent password if a password was previously entered, otherwise only PASSWORD= wbe d splayed.itting displayed is acceptable, p the next setup parameter. Othkey to save the new setting and return to the SETUP MENU #3.PASSWORD OPERATIONith a PASSWORD set, anytime the operator tries to enter Calibration and Setup, theisplay will show the PASSWORD= prompt requiring the operator to enter the correctentered the indicator displaysWdpassword. If the wrong password is ERROR momentarilyatNOTE! It is recommended to write t Usecurend returns to the weight mode. Note that the password is not shown on the display whenhe operator is entering it.he password down and store it in a Ulo ation. If the password a change to the indicator setupis required, the indicator must be reprogrammed. WARNING! Reprogrammingthe indicator will ERASE ALLc is forgotten or lost andthe contents of the Nov-Ram and memory.8200-M538-O1 y 225 Installation Page 73