Cardinal 225 Installation And Technical Manual

Also see for 225: Installation and technical manual Installation, Set-Up and Operation Manual

Contents

Cardinal 225 Installation And Technical Manual Manual pdf 138 page image

8200-M698-O1 Rev B  225 Installation and Technical130ERASING MEMORYErase Ram MemoryWARNING! This procedure will ERASE ALL of the internal RAM memory!This includes the ID file, batcher info, dealer string, mode of operation,visual tickets).If a 225 does not display properly after a program update or otherwise becomes corrupt,perform the following:1. With the indicator in normal operations mode, press the SHIFT key and then theNavigation ENTER key (red square key).2. The display will change to show the SETUP/REVIEW MENU.3. Using the numeric keys, enter 130 and then press the ENTER key.4. The display will change to show a warning message.5. To ERASE ALL the memory, press YES (on the soft keys) and then the ENTER key.6. Otherwise, press NO (on the soft keys) and then the ENTER key to return theSETUP/REVIEW MENU.Erasing EEPROM MemoryWARNING! This procedure will ERASE the EEPROM calibration data. AllEEPROM memory will be erased and the settings for the scales, Serialports, etc. will be set to their default values.1. With the indicator in normal operations mode, press the SHIFT key and then theNavigation ENTER key (red square key).2. The display will change to show the SETUP/REVIEW MENU.3. Using the numeric keys, enter 160 and then press the ENTER key.4. The display will change to show a warning message.5. To ERASE the calibration data, press YES (on the soft keys) and then the ENTER key.6. Otherwise, press NO (on the soft keys) and then the ENTER key to return theSETUP/REVIEW MENU.