Cardinal 225 Installation And Technical Manual

Also see for 225: Installation and technical manual Installation, Set-Up and Operation Manual

Contents

Cardinal 225 Installation And Technical Manual Manual pdf 147 page image

8200-M698-O1 Rev B  225 Installation and Technical 139LEAD AND WIRE SECURITY SEAL INSTALLATIONIf your Model 225 indicator is used in a commercial application and your local metrology lawsrequire the use of physical sealing, a lead and wire security seal can be installed to prevent therear panel from being removed from the indicator to gain access to the calibration jumper (P8)thereby preventing unauthorized access to the calibration adjustments. Refer to the FigureNo. 18 for a suggested location and details on the installation of the security seal.NOTE: In order to install the lead and wire security seal, two (2) acorn nuts on therear panel MUST be replaced with drilled acorn nuts. They are available from theCardinal Scale Mfg. Parts Department. The part number is 8200-B026-08 (NUT HEX#10-32 ACORN SS DRILLED).Figure No. 18