5-21k Saving Graph Screen Contents as an Image (g3p File)There are two methods that can be used to save a g3p file.• Saving to Picture MemoryThis method lets you assign a number from 1 to 20 to an image when you save it. It storesthe image in the storage memory’s PICT folder as a file with a name from Pict01.g3p throughPict20.g3p.• Saving under an Assigned NameThis method saves the image in the folder you want in storage memory. You can assign afile name up to eight characters long.Important!• A dual graph screen or any other type of graph that uses a split screen cannot be saved inpicture memory.u To save a graph screen image to Picture Memory1. While the graph screen is on the display, press K1(PICTURE)1(STORE)1(1-20).2. On the Store In Picture Memory screen that appears, enter a value from 1 to 20 and thenpress w.• There are 20 picture memories numbered Pict 1 to Pict 20.• Storing an image in a memory area that already contains an image replaces the existingimage with the new one.u To store a graph screen image under a file name1. While the graph screen is on the display, press K1(PICTURE)1(STORE)2(SAVE • AS).• This displays a folder selection screen.2. Select the folder where you want to save the image.• To store the image in the root directory, highlight“ROOT”.
