14-1Chapter 14 Geometry1. Geometry Mode OverviewThe Geometry mode allows you to draw and analyze geometric objects.From the Main Menu, enter the Geometry mode.k Geometry Mode MenusUnlike other modes, the Geometry mode does not have function menus along the bottom ofthe screen. Instead, it uses menus named [F1] through [F6] and [OPTN], like the ones shownbelow.The following is a general explanation of Geometry mode menus.• Pressing a key that corresponds to a menu (1 through 6 or K) will display the menufor that tab.• After displaying a menu, use e and d to move between menu screens.• To close a menu without selecting anything, press J.u Menu Operations in This ChapterMenu operations are shown using the following form in this chapter: 3(Draw) – 5:Vector.When you see this, it means you can perform either of the following two operations.• Press 3 to display the Draw menu, use c and f to highlight “5:Vector”, and then pressw.• Press 3 to display the Draw menu and then press f.14
