2-13u To specify the number of significant digits (Sci)Example To specify three significant digits2(Sci)dwPress the number key that corresponds to the number of significant digits you want to specify(n = 0 to 9). Specifying 0 makes the number of significant digits 10.• Displayed values are rounded off to the number of significant digits you specify.u To specify the normal display (Norm 1/Norm 2)Press 3(Norm) to switch between Norm 1 and Norm 2.Norm 1: 10–2 (0.01) > | x|, |x| >10 10Norm 2: 10 –9 (0.000000001) > |x|, |x| >1010u To specify the engineering notation display (Eng mode)Press 4(Eng) to switch between engineering notation and standard notation. The indicator“/E” is on the display while engineering notation is in effect.You can use the following symbols to convert values to engineering notation, such as 2,000(= 2 × 103 ) → 2k.E (Exa) × 1018 m (milli) × 10–3P (Peta) × 1015 μ (micro) × 10–6T (Tera) × 1012 n (nano) × 10–9G (Giga) × 10 9 p (pico) × 10–12M (Mega) × 106 f (femto) × 10–15k (kilo) × 10 3• The engineering symbol that makes the mantissa a value from 1 to 1000 is automaticallyselected by the calculator when engineering notation is in effect.
