8-17LocateFunction: This command displays alpha-numeric characters at a specific location on the textscreen.Syntax: Locate , , Locate , , Locate , , ""[Example] Locate 1, 1, "AB"=Parameters:• line number: number from 1 to 7• column number: number from 1 to 21• value and numeric expression• string: character stringDescription:• This command displays values (including variable contents) or text at a specific location onthe text screen. If there is a calculation input, that calculation result is displayed.• The line is designated by a value from 1 to 7, while the column is designated by a value from1 to 21.Example: Cls=Locate 7, 1, "CASIO FX"This program displays the text “CASIO FX” in the center of the screen.• In some cases, the ClrText command should be executed before running the above program.Receive( / Send(Function: This command receives data from and sends data to a connected device.Syntax: Receive() / Send()Description:• This command receives data from and sends data to a connected device.• The following types of data can be received (sent) by this command.• Individual values assigned to variables• Matrix data (all values - individual values cannot be specified)• List data (all values - individual values cannot be specified)OpenComport38k / CloseComport38kFunction: Opens and closes the 3-pin COM port (serial).Description: See the Receive38k/Send38k command below.(21, 1)(21, 7)(1, 1) (1, 7) (21, 1)(21, 7)(1, 1) (1, 7)
