9-214. Input the List number (1 to 26) of the list memory where you want to store the data and thenpress U.• Performing the next step will overwrite any data currently stored under the list memorynumber you specified here with the data in the range of cells specified by “CellRange”.5. Press (EXE) or the U key to store the data.I Recalling Data from Memory to a SpreadsheetThe following table shows an overview of the recall operations for each type of memory. Fordetails about each operation, see the example operations following the table.Memory Type Recall OperationList Memory(List 1 ~ List 26)You can recall data from a specified list memory to a range ofcells in a single row or a single column. While the first cell ofthe range in a single row or single column is selected, press(E)(RCL)(LIST), and then specify the list number on thescreen that appears.Whether the data is recalled in a column direction or row directiondepends on the Setup screen’s “Move” setting (page 1-29).File Memory(File 1 ~ File 6)You can recall data from a specified file memory to the spreadsheet.Select the cell you want to be the upper left corner of the recalleddata and then press (E)(RCL)(FILE). Next, specify the filememory number on the screen that appears.Matrix Memory(Mat A ~ Mat Z)You can recall data from a specified matrix memory to thespreadsheet. Select the cell you want to be the upper left corner ofthe recalled data and then press (E)(RCL)(MAT). Next,specify the matrix name on the screen that appears.S Example: To recall data from a matrix memory to a spreadsheet1. On the spreadsheet, select the upper left cell of the range where you want the recalled datato be input.2. Press (E)(RCL)(MAT).• This will display a screen like the one shown to the right.The “1st Cell” setting will show the name of the cell youselected in step 1.3. Input the name (A to Z) of the matrix memory whose data you want to recall and then pressU.4. Press (EXE) or U to recall the data.Important!When recalling list memory, file memory, or matrix memory data, an error will occur if therecalled data runs outside the allowable range of the spreadsheet (A1:Z999).
