200511012-7Using the Setup Wizard5. Input an integer in the range of 1 to 255 to specify the number of samples.6. Perform step 10 under “To configure an EA-200 setup using Setup Wizard” on page 2-2to finalize the procedure.uuuuu To configure a setup for PhotoGate and Smart Pulley1. Perform the first two steps of the procedure under “To configure an EA-200 setup usingSetup Wizard” on page 2-2.2. On the “Select Sensor” screen, select [VERNIER] - [Photogate] - [Pulley].• This causes an “Input Distance(m)” screen to appear.• The distance you specify here is the distance the weight travels after it is released.• Input a value in the range of 0.1 to 4 to specify the distance in meters.3. Perform step 10 under “To configure an EA-200 setup using Setup Wizard” on page 2-2to finalize the procedure.4. Use function keys 1 through 4 to select a Gate Status setting.• Selecting a gate status causes a screen for specifying the number of samples to appear.
