1-26• {DISP} ...... {display command menu}• {REL} ....... {conditional jump relational operator menu}• {I/O} ......... {I/O control/transfer command menu}• {:} ............. {multi-statement command}• {STR} ....... {string command}The following function key menu appears if you press )(PRGM) in the RUN • MAT (orRUN) mode or the PRGM mode while binary, octal, decimal, or hexadecimal is set as thedefault number system.• {Prog}....... {program recall}• {JUMP}/{?}/{<}/{REL}/{:}The functions assigned to the function keys are the same as those in the Comp mode.For details on the commands that are available in the various menus you can access from theprogram menu, see “Chapter 8 Programming”.8. Using the Setup ScreenThe mode’s Setup screen shows the current status of mode settings and lets you make anychanges you want. The following procedure shows how to change a setup.S To change a mode setup1. Select the icon you want and press U to enter a mode and display its initial screen. Herewe will enter the RUN • MAT (or RUN) mode.2. Press K(SET UP) to display the mode’s Setupscreen.• This Setup screen is just one possible example. ActualSetup screen contents will differ according to the modeyou are in and that mode’s current settings.3. Use the D and A cursor keys to move the highlighting to the item whose setting youwant to change.4. Press the function key ( to ) that is marked with the setting you want to make.5. After you are finished making any changes you want, press ) to exit the Setup screen.I Setup Screen Function Key MenusThis section details the settings you can make using the function keys in the Setup screen.indicates default setting.Item names below that are marked with an asterisk (*) are not included on the fx-7400Gɉ.
