ES601-US OPERATING MANUALES601pc-US Software/Chapter 8 # Page 170Figure 120Op Codes provided are:• Pass/Fail (op code = 'P')• OK prompt (op code = 'K')• Input requested from user (op code = 'I')• User data input with Pass/Fail (op code = 'E')• Time delay (op code = 'D')• Tester remote control (op code = 'C')• Tester remote control with user data entry (op code = 'R')• Multi-Function - test receptacle, ECG simulator, or external tester control (op code = 'M')• AutoSequence procedure call (op code = 'A')SeeAutomated Testing Principles in Chapter 6 for a more complete discussion of the Op Codes andtheir functionality.Under the Op Code dropdown menu, select the desired op code. Depending on the op code, the commandwill show a different number of text boxes which accept different kinds of data.8.9.4.2 Selecting the CategoryCategory is used by ES601pc-US to select and sort Checkitems based on description or intendedapplication. Categories are user-defined and associate the category name with an upper-case ASCII letter.For example, the user can create a "Defib" Category and assign to this the letter 'D'. In the CheckitemDatabase, Checkitems can thereby be created or modified under the "Defib" category.In the Checkitem Editor, select a Category of a Checkitem via the Category drop-down menu. Create a newcategory in the Checkitem Editor by pressing "New Category". The Category Editor will appear.Type in a new category name in the Category Name textbox, and select the associated category letter in theCategory Designation Letter dropdown. Press "OK" and the new category will appear in the categorydropdown menu.Edit a category by selecting a category and pressing Edit Category. The Category Editor will appear. Type inthe desired name in the Category Name textbox and press "OK".
